PNI TCM 2.6 - Manual (Page 25)

PNI Sensor Corporation DOC#1009269 r11
TCM2.5 & TCM2.6 User Manual Page 25 of 49
lc? (Query Last Calibration Score)
Description Reports the score generated by the last calibration procedure executed, as stored in
EEPROM. Use this command to recall the quality of the last calibration procedure.
Syntax lc?<cr>
Output HnVnMn.nn<cr><lf>
Valid Values 0-9 for H and V
Example lc?<cr>
H7V8M8.00<cr><lf> !An example of a poor score
Related Commands mpcal (Multipoint Calibration)
m? (Magnetometer Update)
Description Samples and returns the X, Y, and Z axes of magnetometer data. When in Standby
mode (h) use this command to query the magnetometer readings regardless of
whether magnetometer data has been selected for inclusion in the output word.
Syntax m?<cr>
Output $X(-)nn.nnY(-)nn.nnZ(-)nn.nn[Ennn]<cr><lf>:<cr><lf>
Resolution 0.01 µT
Valid Values 0 to ±79.9 µT
Example m?<cr>
$X25.00Y10.50Z-03.00[Ennn]*checksum<cr><lf>:<cr><lf>