PNI TCM 2.6 - Manual (Page 34)

PNI Sensor Corporation DOC#1009269 r11
TCM2.5 & TCM2.6 User Manual Page 34 of 49
Valid Values
Input Description
e
Compass data enabled. It will be included in the output word. (Default setting)
d Compass data disabled. It will be excluded in the output word
Table 11: Valid ec= Values
Example ec=e<cr> !include compass data in output word
:<cr><lf>
Query Response ec? :ec=
em= (Enable Magnetometer Data for Output Word)
Description Enables or disables magnetometer data for inclusion in the TCM2.5/2.6 Standard
Output Word
Syntax em=n<cr>
Output :[Ennn]<cr><lf>
Valid Values
Input Description
e
Magnetometer data enabled. It will be included from the output word.
d
Magnetometer data disabled. It will be excluded in the output word. (Default setting)
Table 12: Valid em= Values
Example em=e<cr> !enable magnetometer data
:<cr><lf>
Query Response em? :em=