PNI TCM 2.6 - Manual (Page 38)

PNI Sensor Corporation DOC#1009269 r11
TCM2.5 & TCM2.6 User Manual Page 38 of 49
Valid Values
Input Description
nn.n Declination angle in degrees (default is set to 0.0)
Table 17: Valid mag_dec= Values
Example mag_dec=17.2 !sets the declination angle to 17.2 degrees
:<cr><lf>
Query Response mag_dec? :mag_dec=
sdo= (Set RS232 Output Word Format)
Description Sets the output word format to be used in response to the Single Update Output
Word (sdo?) command and in Continuous Output Mode (go).
Syntax sdo=n<cr>
Output :[Ennn]<cr><lf>
Valid Values
Input Description
t
Standard TCM output string (default)
n NMEA 0183 output string
Table 18: Valid sdo= Values
Example sdo=t<cr> !output word format to TCM standard
:<cr><lf>
Query Response sdo? :sdo=