PNI TCM 2.6 - Manual (Page 41)

PNI Sensor Corporation DOC#1009269 r11
TCM2.5 & TCM2.6 User Manual Page 41 of 49
timeconst= (Set Time Constant for Digital Damping)
Description This command is used with the digital damping command. It sets the time constant to
nn samples for the digital damping.
Syntax timeconst=n<cr>
Output :[Ennn]<cr><lf>
Valid Values
Input Description
Integer value between 1 – 4 Set the measured time constant = 4
Integer value between 5 – 8 Set the measured time constant = 8 (default setting)
Integer value between 9 – 16 Set the measured time constant = 16
Integer value between 16 – 32 Set the measured time constant = 32
Table 21: Valid timeconst= Values
Example timeconst=16<cr> !Filter over 16 measurements
:<cr><lf>
Query Response timeconst? :timeconst=
Related Commands damping= (Set Digital Damping)