Sp= (set sampling period) – PNI TCM 2.6 User Manual
Page 40
Advertising
PNI Sensor Corporation
DOC#1009269 r11
TCM2.5 & TCM2.6 User Manual
Page 40 of 49
sp=
(Set Sampling Period)
Description This command is used to set the sampling rate at which the data will be output in Hz.
NOTE: The function of this command has changed from the TCM2 in which the sp
was the clock divisor to derive the output rate.
Syntax
sp=n<cr>
Output
: [Ennn] <cr><1f>
Valid Values
Input
Description
1
1 Hz output rate
2
2 Hz output rate
3
3 Hz output rate
4
4 Hz output rate
5
5 Hz output rate
6
6 Hz output rate
7
7 Hz output rate
8
8 Hz output rate (default)
Table 20: Valid
sp= Values
Example
sp=4<cr>
!output rate 4 Hz
:<cr><lf>
Query Response
sp?
:sp=
Advertising
This manual is related to the following products: