Avaya TransTalk MDW 9040 User Manual
Page 109
Multiple Dual Radio Modules Spacing Wall-Mounting Template
Wall-Mounting Templates
E
MDW 9040 Wireless Pocket Phone Installation and Use, 503-801-190
Issue 2, February 2001
101
Multiple Dual Radio Modules Spacing Wall-Mounting
Template
Use the template below to position the screws for mounting multiple MDW 9040 Dual Radio Modules:
1
Cut out the template along the dotted line.
2
Lightly affix the template to the wall with tape where you want to attach the radio
modules. If possible, choose a location that will position at least one of the screw
holes over a wall stud.
3
Mark the wall.
4
Position the plates so they are at least 5.25 inches (13.34 cm) apart.
Note:
If you cannot locate a wall stud for one of the screws, use molly bolts or
another type of hollow-wall fastener. Be sure to place the wall spacers on
the screws before inserting them permanently.
5.25 inches (13.34 cm)
center to center
3.25 inches (8.26 cm)
center to center
✃
✃
✃