The handset display – Avaya TransTalk MDW 9040 User Manual
Page 53
About the Handset
Programming & Using the MDW 9040 Pocket Phone
5
MDW 9040 Wireless Pocket Phone Installation and Use, 503-801-190
Issue 2, February 2001
45
The Handset Display
The MDW 9040 Pocket Phone display has one line of icons and four alphanumeric-character lines (up to
16 digits and/or characters on each line) to provide you with status information and programming options. The
MDW 9040 display also provides Backlighting so that you can read your display in poorly-lit environments. You
can choose to turn on the Backlighting feature or turn it off as well as select the amount of time the feature is on.
The following default screen appears initially on the handset display.
•
The top row of the display shows the status icons.
Figure 15. The MDW 9040 Display
The following list describes the meaning of each status icon (from left to right).
Figure 16. The Top Row of the Display Showing Handset Status Icons.
1
A
2
B
3
C
4
D
7/18 Tues
03:27p
00:00
1
The
Message
icon (
) lights when you have a message.
2
The
Radio Frequency (RF) Signal Level
icon (
) is divided into four bars to show the radio
frequency signal strength.
3
The
Handset Off-Hook Status
icon (
) lights when the handset or the headset is off-hook (on).
4
The
Battery Charge Level
icon (
) is divided into four sections to show the remaining battery life
(when low, 2 beeps are emitted and the icon flashes). For more information, see “
” on
5
The
Vibrator Status
icon (
) lights when the vibrator has been activated.
6
The
Ringer Status
displays a
No Ring
icon (
) when the alerter (ringer) is disabled (off). If the alerter
is enabled (on), the
Ringer
(
) icon is displayed.
7
The
Microphone Mute Status
icon ( ) lights when the handset or headset microphone has been turned
off by pressing the Mute button on the side of the handset.
8
The
More Options Available
icon ( ) lights when there are more options that are available.
7
8
6
5
4
3
2
1