Avaya TransTalk MDW 9040 - Manual (Page 76)

5
Programming & Using the MDW 9040 Pocket Phone Using Handset Features
MDW 9040 Wireless Pocket Phone Installation and Use, 503-801-190 68 Issue 2, February 2001
Preselecting a Line
You may sometimes want to select a line other than the line to which the communications system automatically
connects you. To preselect a line, you must first enable Line Preselection. See “
Turning on the Line Pre-Select
Option ” earlier in this chapter.
Once Line Pre-Select is enabled, use the following procedure:
1 If the handset is “asleep,” press to wake it up and activate the display.
2 If the Selection arrow does not appear to the right of the row that includes the line
or button you want to use, press the Select-Row (
) button one or more times
until the arrow is to the right of that row. (See “ The Select-Row Button and the
Column Buttons ” earlier in this chapter for more information.)
3 Press the Column ( ) button that corresponds to the line that you want to
select.
The icon flashes in the display and the handset emits double beeps.
4 Press .
The icon displays steadily, and you are connected to the line you chose.
Using a Headset
Avaya offers Mobility headsets, which are specifically designed for use with your
MDW 9040 Pocket Phone. A headset assists in call answering and provides hands-free operation.
For ordering information, see Appendix D , “ Ordering Replacement and Optional Parts .”
! CAUTION:
Plug ONLY the Mobility-type headset cord into the headset adapter.
Figure 25. Connecting a Headset to Your MDW 9040
Note: Calls cannot be heard on the handset receiver when the headset is
plugged in to the headset adapter. The handset microphone is also
deactivated. The range of the handset is slightly diminished when you are
using a headset. You may need to move closer to the radio module or
move the radio module closer to you.