Avaya TransTalk MDW 9040 - Manual (Page 64)

5
Programming & Using the MDW 9040 Pocket Phone Setting or Changing Handset Settings
MDW 9040 Wireless Pocket Phone Installation and Use, 503-801-190 56 Issue 2, February 2001
Activating Backlighting The Backlighting option for the display is factory set to ON for the MDW 9040
Pocket Phone. However, the Backlighting can also be turned OFF.
Backlighting for the handset display allows you to see the display in poorly-lit
environments. If you choose to turn the Backlighting option on for your handset
display, you can also choose the amount of time Backlighting is active. The options
are 7 seconds, 15 seconds, and 30 seconds.
To activate or deactivate the Backlighting option and choose the amount of time
Backlighting is active:
1 From the initial Options Menu screen, press the Softkey ( ) below More.
Additional Options Menu options display.
2 With the Select-Row arrow to the right of Backlighting, press the Softkey
(
) below Sel.
The Backlighting Control screen displays.
Note: The currently active option, if any, flashes (indicated by **).
3 Press the Select-Row ( ) button to move the arrow to the On or Off option.
4 When you have moved the Select-Row arrow to the appropriate option, press the
Softkey (
) below Sel.
5 If you selected to turn Backlighting On, you will be prompted to choose the
amount of time Backlighting is active.
The Backlighting Time Setting screen displays when Backlighting is activated.
6 Press the Select-Row ( ) button to move the arrow to the amount of time you
want.
7 When you have moved the Select-Row arrow to the appropriate option, press the
Softkey (
) below Sel.
OPTIONS MENU
Backlighting
Ä
Pre-Select
Sel More
Back
BACKLIGHTING:
*On*
Ä
Off
Sel Back
B-Light 7 sec.
*B-Light 15sec.*
Ä
B-Light 30 sec.
Sel Back