Avaya TransTalk MDW 9040 - Manual (Page 36)

2
Installing the MDW 9040 Pocket Phone System The Battery Charger
MDW 9040 Wireless Pocket Phone Installation and Use, 503-801-190 28 Issue 2, February 2001
Inserting and Removing the Handset’s Battery Pack
Before you register the handset with the radio module, you must insert the charged battery pack in the handset.
The following explains how to install the handset battery pack.
To insert the battery pack into the handset:
1 Insert the two small rectangular tabs located along the bottom back edge of the
handset into the two rectangular holes along the bottom front edge of the battery
pack.
2 Press the battery pack downward until it clicks into place.
Note: The battery pack must be charged prior to using the handset.
Rectangular tabs
Spring latch