Avaya TransTalk MDW 9040 - Manual (Page 16)

2
Installing the MDW 9040 Pocket Phone System Quick Installation Overview
MDW 9040 Wireless Pocket Phone Installation and Use, 503-801-190 8 Issue 2, February 2001
Quick Installation Overview
There are four main steps for installing your MDW 9040:
1 Connecting the Dual Radio Module to the switch
Make sure you have the correct radio module for your system. (See “
About the
Dual Radio Module ” later in this Chapter.)
2 Registering each handset to the appropriate Dual Radio Module
Only one handset can be registered at a time. (See “
Setting Up and Registering
the Handset ” in Chapter 4 .)
3 Checking button mapping to coincide with the communications system to
which the MDW 9040 is connected
Make sure you have mapped the buttons to the correct system. (See
Chapter 6 ,
“ MDW 9040 Pocket Phone Compatibility ” for more information.)
4 Choosing features and options
A menu of features and options is available to configure your handset. (See
“
About the Handset ” in Chapter 5 .)
About the Dual Radio Module
Each radio module can communicate with up to two handsets. However, it is important to remember that only
one handset can be registered at a time with its appropriate radio module.
There are two types of Dual Radio Modules. The table below shows which type of
radio module you should use.
DUAL RADIO MODULE SELECTION TABLE
PEC of Compatible
Dual Radio Module Dual Radio Module
Model Number Switch Type
3204-DRE 600A1 PARTNER
MERLIN
MERLIN 410/820
MERLIN LEGEND
3204-DRD 601A1 MERLIN MAGIX
DEFINITY