Brother FAX 1920CN - Manual (Page 120)

REMOTE FAX OPTIONS 8 - 6
Remote commands
Follow the commands below to access features when you are away
from the machine. When you call the machine and enter your
Remote Access Code (3 digits followed by
), the system will give
two short beeps and you must enter a remote command.
Remote commands Operation details
90 Exit After a long beep, you can exit Remote
Retrieval.
91 Playing Voice Messages
(FAX-1920CN only) After one long beep, the machine plays the
ICM.
1 Skip to back
or
Repeat
Press 1 while listening to an ICM to repeat it.
If you press 1 before a message, you will hear
the previous message.
2 Skip next While playing the ICM, you can skip to the
next message.
9 STOP Playing Stop playing the ICM.
93 Erase all ICM
(FAX-1920CN Only) If you hear one long beep, the erase is
accepted. If you hear three short beeps, you
cannot erase because all voice messages
have not been played, or there are no voice
message to erase.
*This code erases all recorded messages, not
one at a time.
94 Play and Record OGM in
Memory
(FAX-1920CN only)
1 Play 1 Msg Ctr OGM The machine plays the selected OGM. You
can stop playing OGMs by pressing 9.
2 F/T OGM
2 Record 1 Msg Ctr OGM After one long beep, you can record the
selected OGM. You will hear the message
played once. You can stop recording the
message by pressing 9.
2 F/T OGM