Brother FAX 1920CN - Manual (Page 86)

SETUP RECEIVE 5 - 16
■
The machine will only answer calls to its registered number.
■
The first two rings are silent on the machine. This is because the
fax must «listen» to the ring pattern (to compare it to the pattern
that was ‘registered’). (Other telephones on the same line will
ring.)
■
If you program the machine properly, it will recognize the
registered ring pattern of the ‘fax number’ within 2 ring patterns
and then answer with a fax tone. When the ‘voice number’ is
called, the machine will not answer.
Registering the Distinctive Ring pattern
Very important!
After you have set the Distinctive Ring feature to ON, the receive
mode is set to
Manual automatically. Unless you have a TAD or
Voice Mail set up on the Distinctive Ring number, Manual mode
means you must answer all the calls yourself. You can not change
the receive mode to another mode while the Distinctive Ring is set to
on.
1
Press Menu/Set , 2 , 0 , 1 .
2
Press or to select Set .
Press Menu/Set .
3
Press or to select the stored ring pattern you want to use.
Press Menu/Set .
(You will hear each pattern as you scroll through the four
patterns. Make sure you choose the pattern that the telephone
company gave you.)
4
Press Stop/Exit .
Distinctive Ring is now set to On .
1.Distinctive