Brother FAX 1920CN - Manual (Page 25)

1 - 4 INTRODUCTION
1 One-Touch keys
These 4 keys (MFC-3320CN only)
or 2 keys (FAX-1920CN only) give
you instant access to 8
(MFC-3320CN only) or 4
(FAX-1920CN only) previously
stored dial numbers.
2 Shift
To access memory locations 5
through 8 (MFC-3320CN only) or 3
and 4 (FAX-1920CN only) in the
One-Touch keys, hold down the
Shift key.
3 Photo key:
PhotoCapture
Lets you access the PhotoCapture
Center.
4 Message Center keys
(FAX-1920CN only)
MC On/Off
Let’s you activate the Message
Center and blinks if you did not play
your voice messages.
Play/Record
Lets you listen to voice messages
stored in memory. Also, lets you
record telephone calls.
Erase
Lets you delete voice messages, all
fax messages or all messages.
5 Copy keys
(Temporary settings):
Options
You can quickly and easily select
temporary settings for copying.
Quality
Use this key to temporarily change
the quality for Copying.
6 Fax and telephone keys:
Redial/Pause
Redials the last number you called.
It also inserts a pause in auto dial
numbers.
Hook
Press before dialing if you want to
make sure a fax machine answers,
and then press Black Start or Color
Start.
Hold (FAX-1920CN only)
Lets you place telephone calls on
hold.
Fax Resolution
Sets the resolution when you send a
fax.
7 Dial Pad
Use these keys to dial telephone
and fax numbers and as a keyboard
for entering information into the
machine.
The # key lets you temporarily
switch the dialing mode during a
telephone call from Pulse to Tone.
8
Stop/Exit
Stops an operation or exits from the
menu.
9
Black Start
Lets you start sending faxes or
making copies in black and white.
Also for MFC-3320CN, lets you start
a scanning operation. (Color or
mono are depending on scanning
setting on your PC)