Brother FAX 1920CN - Manual (Page 99)

6 - 10 SETUP SEND
Real Time Transmission
When you are sending a fax, the machine will scan the originals into
the memory before sending. Then, as soon as the phone line is free,
the machine will start dialing and sending.
If the memory becomes full, the machine will send the original in real
time (even if
Real Time TX is set to Off ).
Sometimes, you may want to send an important original immediately,
without waiting for memory transmission. You can set
Real Time
TX to On for all documents or for the next fax only.
If you want to fax multiple pages, use Dual Access.
(See Dual Access (Not available for color faxes) on page 6-9.)
1
If it is not illuminated in green, press ( Fax ).
2
Load your original. (See Load originals on page 2-1.)
3
Press Menu/Set , 2 , 2 , 5 .
4
To change the default setting, press
or to select On (or Off ).
Press Menu/Set . Go to Step 6.
—OR—
For the next fax transmission only, press or to select
Next Fax Only .
Press Menu/Set .
5
Press or to select Next Fax:On (or Next
Fax:Off ).
Press Menu/Set .
6
Press 1 if you want to choose more settings and the LCD will
return to the Setup Send menu.
—OR—
Press 2 if you have finished choosing settings.
7
Enter a fax number.
Press Black Start or Color Start .
In Real Time Transmission, the redial feature doesn't work.
If you are sending a color Fax, the machine will send it in real
time (even if
Real Time TX is set to Off) .
5.Real Time TX