Brother FAX 1920CN - Manual (Page 12)

x
Quick Reference Guide
Sending faxes
Automatic Transmission
1
If it is not illuminated in
green, press ( Fax ).
2
Load your original. (See
Load originals on page 2-1.)
3
Enter the fax number using
One-Touch, Speed-Dial,
Search or the dial pad.
4
Press Black Start or
Color Start .
Receiving faxes
Select Receive Mode
(MFC-3320CN only)
1
Press Menu/Set , 0 , 1 .
2
Press or to select
Fax Only , Manual ,
Fax/Tel or External
TAD , and then press
Menu/Set .
Select Receive Mode
(FAX-1920CN only)
1
Press Menu/Set , 0 , 1 .
2
Press or to select
Fax Only , Manual , or
Fax/Tel , and then press
Menu/Set .
Storing numbers
Storing One-Touch Dial
numbers
1
Press Menu/Set , 2 , 3 , 1 .
2
Press the One-Touch key
where you want to store the
number.
3
Enter a number (up to 20
digits), and then press
Menu/Set .
4
Enter a name up to 15
characters (or leave it
blank), and then press
Menu/Set .
5
Press Stop/Exit .
Storing Speed-Dial numbers
1
Press Menu/Set , 2 , 3 , 2 .
2
Using the dial pad, enter a
two-digit Speed-Dial
location number, and then
press
Menu/Set .
3
Enter a number (up to 20
digits), and then press
Menu/Set .
4
Enter a name up to 15
characters (or leave it
blank), and then press
Menu/Set .
5
Press Stop/Exit .