Brother FAX 1920CN - Manual (Page 130)

MESSAGE CENTER (FAX-1920CN ONLY) 9 - 7
Recording a conversation
You can record a telephone conversation by pressing Play/Record
during the conversation. Your recording can be as long as the
Incoming Message Maximum Time. The other party will hear an
intermittent beep while recording. To stop recording, press
Stop/Exit .
Record Fax/Tel Outgoing Announcement
(F/T OGM)
This is the announcement played by your machine (not an external
TAD) when someone calls and your machine is set to Fax/Tel
receive mode. Although callers hear your announcement, they
cannot leave a message. By choosing
F/T OGM (not Msg Ctr OGM )
you can record the announcement using the same steps as for the
Message Center outgoing message. (See Recording Message
Center Outgoing Message on page 9-2.) You can also listen to and
erase the F/T OGM the same way, by choosing
F/T OGM (not Msg
Ctr OGM ). (See Listening to Outgoing Message (OGM) on page 9-2
and Erasing Outgoing Message (OGM) on page 9-3.)
If you need to review the steps for setting up the Fax/Tel receive
mode, see Chapter 5.