Setting toll saver (fax-1920cn only), Setting toll saver (fax-1920cn only) -6 – Brother FAX 1920CN User Manual
Page 76
SETUP RECEIVE 5 - 6
Setting Toll Saver (FAX-1920CN Only)
When you set the toll saver feature, the machine answers after four
rings if you don’t have voice or fax messages and after two rings if
you do have voice or fax messages. This way, when you call the
machine for remote retrieval and let it ring three times, you know you
have no messages and can hang up to avoid a toll charge.
1
If it is not illuminated in green, press
(
Fax
).
2
Press
Menu/Set
,
2
,
1
,
1
.
3
Press
or
to select
Toll Saver
.
Press
Menu/Set
.
4
Press
or
to select
On
.
Press
Menu/Set
.
5
Press
Stop/Exit
.
When Toll Saver is
On
, it overrides your Ring Delay setting. Toll
Saver must be off for the machine to operate using your Ring
Delay setting.
(See Setting the Ring Delay on page 5-5.)
The Toll Saver feature is available only when the Message
Center is set to On.
If you are using Distinctive Ring, do NOT use the Toll Saver
feature.
1.Ring Delay