Brother FAX 1920CN - Manual (Page 79)

5 - 9 SETUP RECEIVE
Easy Receive (FAX-1920CN only)
When you use this feature, you don’t have to press Black Start ,
Color Start , or the Fax Receive Code 5 1 when you answer a
fax call and hear calling beeps. Just hold the handset and wait a few
seconds. When you see
Receiving on the LCD or when you hear
“chirps” through the handset of an extension phone connected to
another telephone wall jack, just replace the handset. Your machine
does the rest. Selecting
On allows the machine to receive fax calls
automatically, even if you lift the handset of an extension or external
phone. Selecting
Semi lets the machine receive the call only if you’ve
answered it at the machine. Selecting Off means you’ll have to
activate the machine yourself, by pressing Black Start or Color
Start or by pressing 5 1 if you are not at your machine.
(See Operation from extension telephones on page 5-11 and For
Fax/Tel mode only on page 5-11.)
1
If it is not illuminated in green, press ( Fax ).
2
Press Menu/Set , 2 , 1 , 3 .
3
Use or to select On ,
Semi , or Off .
Press Menu/Set .
4
Press Stop/Exit .
If you’ve set the feature to ON , but your machine doesn’t
automatically connect a fax call when you lift an external or
extension phone handset, press the Fax Receive code
5 1 .
At the machine, lift the handset and then press Black Start or
Color Start .
If you send faxes from a computer on the same phone line and
the machine intercepts them, set Easy Receive to
Off .
3.Easy Receive