Axis Communications Axis Network Scan Server 700 - Manual (Page 66)

AXIS 700 User’s Manual Section 4: Using the AXIS 700 65
7. If you are not satisfied with the result, you can try one of the other
available profiles or set up a new one by clicking Custom >>.
8. If you have additional documents to scan, click Reserve Scanner to
lock the unit for your own use and then complete the scanning from
the AXIS 700 control panel.
9. Insert a single page on the flatbed or a stack of paper into the sheet-
feeder of the attached scanning device.
10. At the AXIS 700 control panel, continue as follows:
One single page or a stack of paper in the sheet feeder:
a. Press Send to scan and transmit the image to your Web
browser in one step.
Several separate pages:
a. Press Scan to scan each page.
b. Insert the next page and press Scan again. Repeat the
procedure until all your pages are scanned.
c. Press Send to transmit the image to your Web browser.
During the scanning this message appears on the display:
11. When you have pressed Send and the transfer of the scanned
image is completed, the AXIS 700 is released for other users to access.
Notes:
o By scanning multiple pages, you can accumulate several pages into
one image file. See “Multipage Image Files” on page 57.
o You must press Scan
or Send on the control panel within
three minutes, otherwise the operation will end automatically.
6FDQQLQJ 
SOHDVH ZDLW