Axis Communications Axis Network Scan Server 700 - Manual (Page 71)

Appendix A: Troubleshooting AXIS 700 User’s Manual 70
Reset Button Follow these steps to restore the default settings using the Reset
button:
1. Turn off the AXIS 700.
2. Press and hold the Reset button while you switch on the AXIS 700.
Keep the Reset button pressed until the Status, Busy and Network
indicators flash at regular two second intervals.
3. Release the Reset button and wait at least two seconds (one flash of
the indicators).
4. Press and hold the Reset button for at least five seconds until the
Network indicator remains constantly lit.
5. The AXIS 700 is now reset to factory default settings.
6. Restart the AXIS 700 by turning it off and then back on again.
Web Browser Follow these steps to reset to the defaults settings from a Web browser:
1. Start the Web browser.
2. Enter the name or the IP address of the AXIS 700 in the
location/address field. The AXIS 700 Home Page is displayed.
3. Click Administration.
4. Click This AXIS 700.
5. Click Factory Defaults.
The AXIS 700 will now restart with the factory default settings.
Reset button