Axis Communications Axis Network Scan Server 700 - Manual (Page 85)

Appendix C: The Parameter List AXIS 700 User’s Manual 84
[IP]
InternetAddress = 0.0.0.0 Specifies the AXIS 700 IP address, which must be a
unique and valid address to prevent conflicts with other
network devices.
DefaultRouter = 0.0.0.0 Specifies the IP address for the default router. All traffic
directed outside the local network (according to the
NetMask) is sent to the default router. Any re-routing
via other routers is done automatically. The default
0.0.0.0 indicates that no default router is set.
NetMask = 0.0.0.0 Specifies the subnet mask used for determining whether
the traffic should stay within the network or be sent via
a router. For example, the normal class C mask is
255.255.255.0. The default 0.0.0.0 indicates that
automatic router sensing is used.
BOOTPEnable = yes Enables BOOTP for setting the IP address.
RARPEnable = yes Enables RARP for setting the IP address.
DHCPEnable = yes Enables DHCP for setting the IP address.
DomainName = Specifies the name of the domain to which the AXIS 700
belongs. Domain refers to a set of computers on a
network that have been assigned a group name. A
domain might contain two or more workgroups.
PrimaryDNS = 0.0.0.0 Specifies the IP address of the primary DNS server.
Used e.g. for setting up of destinations with names
instead of IP addresses.
SecondaryDNS = 0.0.0.0 Specifies the IP address of the secondary DNS server,
should the primary be unavailable or disconnected.
NTPServer = Specifies the name or IP address of the NTP server used
for time synchronization.
[HTTP/FTP]
ExternalLink = Specifies the URL to a customized link, e.g. to your
company’s web site. The link will be available from the
AXIS 700 Web browser interface.
ExternalImage = Specifies the URL to the image that will indicate the
customized external link.
[SNMP]
GetCommunityName = public Specifies the community that has read only access to all
supported SNMP objects except WriteCommunity,
SupervisorPassword and ftpPassword. It corresponds to
the ReadCommunity SNMP object.
TrapDestination = 0.0.0.0 Specifies the IP Address which SNMP traps are sent to.
It corresponds to the TrapAddress SNMP object.
Default is 0.0.0.0, which means that all SNMP traps are
disabled.
TrapCommunityName = public Specifies the community for all generated SNMP traps. It
corresponds to the TrapCommunity SNMP object.
Parameter name Value Description