Andrew 3.7-Meter Earth Station Antenna - Manual (Page 64)

Step 2
64
Installation Procedures
Position and attach the subreflector-mounting ring (part of 205929 subreflector assem-
bly) to the corresponding mounting holes in the strut-support plates using 3/8 inch by 1
inch bolts, oversized flat washers, lock washers, and nuts as shown in Figure 3-53a and
Figure 3-53b.
NOTE: Ensure that one subreflector adjustment stud is located at the six o’clock posi-
tion.
Figure 3-52b: Subreflector Strut Assembly
Figure 3-53a: Subreflector Assembly