Canon imagePROGRAF iPF6400S - Manual (Page 139)

iPF6400S Basic Guide
139
Er
ror M
essa
ge
Me
ssa
ges
r
egar
ding
pa
per
Roll printing is selected.
Cause Corrective Action
You have attempted to print on a
roll, but no roll is loaded. Press ▲ or ▼ to select Load Roll Paper, and then press the OK button. Load the
roll, and then print.
(See "Loading Rolls on the Roll Holder.")➔P.12
(See "Loading Rolls in the Printer.")➔P.14
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.
Roll printing is selected, but manual paper is loaded.
Cause Corrective Action
A print job for rolls was received
when a sheet is loaded. Follow these steps to load and print on a roll.
1. Press
▲ or ▼ to select Eject Paper, press the OK button, and remove the
sheet.
(See "Removing Sheets.")➔P.30
2. Load a new roll.
(See "Loading Rolls in the Printer.")➔P.14
The printer now starts printing the print job.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
The roll is empty.
Cause Corrective Action
The roll is
empty. Follow these steps to replace the used roll with a new roll of the same type and size.
1. Press the OK button and remove the roll.
(See "Removing the Roll from the Printer.")➔P.17
(See "Removing Rolls From the Roll Holder.")➔User's Guide
2. Load the new roll.
(See "Loading Rolls on the Roll Holder.")➔P.12
(See "Loading Rolls in the Printer.")➔P.14
3. If no barcode was printed on the roll, specify the type of paper.
(See "Changing the Type of Paper.")➔User's Guide
4. When you have selected ManageRemainRoll > On in the control panel menu and a barcode is not
printed on the roll, also specify the paper length.
(See "Specifying the Paper Length.")➔User's Guide
5. If Not finished printing. Finish printing remaining jobs? is shown on the Display Screen, press
the OK button.
Printing will resume, starting from the page on which the error occurred.
If no message appears, printing will continue from the next page.
There is
remaining roll
paper, but
because it
could not be
advanced, it
could not be
detected. The unused portion of the roll is heavy, and this is placing a burden on the printer. It may be helpful to
change the printing mode, which will change the paper feed timing.
Choose a higher level of Print Quality in the Advanced Settings of the printer driver.
(See "Giving Priority to Particular Graphic Elements and Colors for Printing.")➔User's Guide