Canon imagePROGRAF iPF6400S - Manual (Page 160)

iPF6400S Basic Guide
160
Er
ror M
essa
ge
Other
Mes
sages
Prepare for parts replacement.
Cause Corrective Action
It is almost time to replace consumables for
which service is required. If Parts replacement time has passed. is displayed, you can continue
to use the printer for some time.
Contact your Canon dealer for assistance.
Parts replacement time has passed.
Cause Corrective Action
It is past the recommended time to replace consumables for
which service is required. Contact your Canon dealer for assistance.
Unknown file.
Cause Corrective Action
Data sent to keep the printer up to date (such as paper
information) is in the wrong format. Check the data. Turn off the printer and wait a while before
restoring power, and then resend the data.
You have uploaded firmware for a different model. Check the firmware version. Turn off the printer and wait a
while before restoring power, and then resend the firmware.
If the message is displayed again, contact your Canon
dealer for assistance.
Calibration There is a problem with the multi-sensor.
Cause Corrective Action
The performance of a sensor inside the printer may be
impaired. Press the OK button and cancel calibration. Contact your
Canon dealer for assistance.
Multi-sensor error
Cause Corrective Action
Direct sunlight or strong lighting may be shining on the
printer and causing the sensor to malfunction. Take steps to ensure the printer is not used when exposed
to direct sunlight or strong lighting.
The performance of a sensor inside the printer may be
impaired. Turn off the printer and wait at least three seconds before
restoring the power.
If the message is displayed again, contact your Canon
dealer for assistance.