Canon imagePROGRAF iPF6400S - Manual (Page 141)

iPF6400S Basic Guide
141
Er
ror M
essa
ge
Me
ssa
ges
r
egar
ding
pa
per
Paper jam.
Cause Corrective Action
A paper jam occurred
in the printer during
printing. 1. For roll paper, cut the paper on the upper side of the Paper Feed Slot.
2. Press the OK button.
3. Remove the jammed paper.
(See "Clearing Jammed Paper (Paper Feed Slot).")➔P.107
(See "Clearing Jammed Roll Paper.")➔P.102
(See "Clearing a Jammed Sheet, Fed Manually.")➔P.105
4. Load the paper.
(See "Loading Rolls in the Printer.")➔P.14
(See "Loading Sheets in the Feed Slot.")➔P.21
5. If Not finished printing. Finish printing remaining jobs? is shown on the Display Screen,
press the OK button.
Printing will resume, starting from the page on which the error occurred.
Paper loaded askew.
Cause Corrective Action
Paper loaded crooked was detected when the paper was advanced. Press the OK button and reload the
paper.
(See "Loading Rolls in the Printer.")➔
P.14
(See "Loading Sheets in the Feed Slot.")
➔
P.21
If this error recurs after you reload the
roll, remove the Roll Holder from the
printer, push the roll firmly in until it
touches the Roll Holder flange, and
reload the Roll Holder in the printer.
(See "Loading Rolls on the Roll Holder.")
➔
P.12
Important
• To disable this message (if it is displayed repeatedly despite reloading paper, for example),
choose Off or Loose in the Skew Check Lv. setting of the printer menu. However, this may
cause jams and printing problems because paper may be askew when printed. Also, the Platen
may become soiled, which may soil the back of the next document when it is printed.
Paper not aligned with right guide.
Cause Corrective Action
Skew Check Lv. on the Control Panel menu is set to
something other than Off and the paper is not aligned with
the guide on the right during loading. Follow these steps to reload the sheet.
1. Press the OK button to clear the error.
2. Reload the paper.
(See "Loading Sheets in the Feed Slot.")➔P.21
Cannot detect papr
Cause Corrective Action
The printer could not detect the paper. Reload the paper as follows.