Canon imagePROGRAF iPF6400S - Manual (Page 81)

iPF6400S Basic Guide
81
Pr
in
ter
R
elo
ca
tion
Pr
epar
ing to Tra
ns
fer
the
P
rin
te
r
Important
• Store the ink tanks you removed with the
ink holes (a) facing up. Otherwise, ink
may leak and cause stains.
3 Close all ink tank lock levers, and then close the
Ink Tank Cover.
At this point, ink is drawn out from inside the
tubes.
Important
• Do not remove the Maintenance Cartridge unless a replacement message appears.
Removing the Maintenance Cartridge while the ink is bring drawn in may cause the ink
to leak out.
4 When the process is finished, Completed! Turn
Power Off!! is displayed.
Press the Power button and turn off the printer.
Pack the printer
Refer to the Setup Guide for details on packing the printer and installing it after transfer.
1 Disconnect the power cord and interface cable.
Important
• Unplug the power cord once the power is turned off. Unplugging the printer before it is
off and moving it may cause damage. If you accidentally unplug the printer before
turning it off, plug it in again, reinstall the ink tank, and perform the procedure again.