Cop y – Canon PowerShot SX280 HS User Manual
Page 11
1
2
3
4
5
6
7
8
9
10
11
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Using GPS
Function
Auto Mode/
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
11
•
Do not sit down with the camera in your pocket.
Doing so may cause malfunctions or damage the screen.
•
When putting the camera in your bag, ensure that hard objects do
not come into contact with the screen.
•
Do not attach any hard objects to the camera.
Doing so may cause malfunctions or damage the screen.
Caution
Denotes the possibility of damage to the equipment.
•
Do not aim the camera at bright light sources (such as the sun on a
clear day).
Doing so may damage the image sensor.
•
When using the camera on a beach or at a windy location, be careful
not to allow dust or sand to enter the camera.
•
Do not push down on the flash, or pry it open.
This may cause the product to malfunction.
•
In regular use, small amounts of smoke may be emitted from the
flash.
This is due to the high intensity of the flash burning dust and foreign
materials stuck to the front of the unit. Please use a cotton swab to remove
dirt, dust or other foreign matter from the flash to prevent heat build-up and
damage to the unit.
•
Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may
occur.
•
Before you discard the battery, cover the terminals with tape or other
insulators.
Contacting other metal materials may lead to fire or explosions.
•
Unplug the battery charger from the power outlet after charging is
complete, or when you are not using it.
•
Do not place anything, such as cloth, on top of the battery charger
while it is charging.
Leaving the unit plugged in for a long period of time may cause it to
overheat and distort, resulting in fire.
•
Do not place the battery near pets.
Pets biting the battery could cause leakage, overheating or explosion,
resulting in fire or damage.
COP
Y