Canon PowerShot SX280 HS - Manual (Page 64)

1
2
3
4
5
6
7
8
9
10
11
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Using GPS
Function
Auto Mode/
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
64
Movies
Changing Movie Image Quality
3 image quality settings are available. For guidelines on the maximum
movie length at each level of image quality that will fit on a memory card,
see “Recording Time per Memory Card” ( = 191 ).
Configure the setting.
z z Press the < m> button, choose [ ]
in the menu, and choose the desired
option ( = 34 ).
X X The option you configured is now
displayed.
z z To restore the original setting, repeat this
process but choose [ ].
Image
Quality
Resolution Frame Rate Details
1920 x 1080* 30 fps For shooting in Full HD
1280 x 720 30 fps For shooting in HD
640 x 480 30 fps
For shooting in standard
definition
* Fine Detail Movie Processing (This function quickly processes a large amount of
information, making it possible to record even finer details in movies.)
• In [ ], and [ ] modes, black bars displayed on the top and bottom
edges of the screen indicate image areas not recorded.
• In [ E] mode, [ ] is also available, offering smoother motion ( = 80 ).
Still Images
Red-Eye Correction
Red-eye that occurs in the flash photography can be automatically
corrected as follows.
1 Access the [Flash Settings]
screen.
z z Press the < n> button, choose [Flash
Settings] on the [ 4] tab, and then press
the < m> button ( = 35 ).
2 Configure the setting.
z z Choose [Red-Eye Corr.], and then
choose [On] ( = 36 ).
X X Once the setting is complete, [ R] is
displayed.
z z To restore the original setting, repeat this
process but choose [Off].
• Red-eye correction may be applied to image areas other than eyes (if
the camera misinterprets red eye makeup as red pupils, for example).
• You can also correct existing images ( = 120 ).
• You can also access the screen in step 2 by pressing the < r> button and then
the < n> button.
COP
Y