Remove the eye-fi card before, Cop y – Canon PowerShot SX280 HS User Manual

Page 171

Advertising
background image

1
2
3
4
5
6
7
8
9

10

11

Cover
Preliminary Notes

and Legal Information
Contents: Basic

Operations

Advanced Guide

Camera Basics
Using GPS

Function
Auto Mode/

Hybrid Auto Mode
Other Shooting

Modes

Tv, Av, and M

Mode
Playback Mode

Wi-Fi Functions

Setting Menu

Accessories

Appendix

Index

Basic Guide

P Mode

171

Disabling Eye-Fi Transfer

Configure the setting as follows to disable Eye-Fi transfer by the card, if

necessary.

Choose [Disable] in [Eye-Fi trans.].

z

z

Press the <

n> button, choose

[Eye-Fi Settings] on the [

3] tab, and then

press the <

m> button.

z

z

Choose [Eye-Fi trans.], and then choose

[Disable].

[Eye-Fi Settings] is not shown unless an Eye-Fi card is in the

camera with its write-protect tab in the unlocked position. For this

reason, you cannot change settings for an inserted Eye-Fi card if

the write-protect tab is in the locked position.

Connection status of Eye-Fi cards in the camera can be checked on the

shooting screen (in regular information display mode) or playback screen (in

simple information display mode).

(Gray)

Not connected

Interrupted

(Blinking white) Connecting

Not communicating

(White)

Connected

Error acquiring Eye-Fi card

information*

2

(Animated)

Transfer in progress*

1

*1 Power saving (

=

32

) on the camera is temporarily disabled during image transfer.

*2 Restart the camera. Repeated display of this icon may indicate a problem with the

card.

Images labeled with a [ ] icon have been transferred.

Choosing [

] mode will interrupt the Eye-Fi connection. Although the Eye-Fi

connection will be restored after you choose another shooting mode or enter

Playback mode, the camera may transfer any movies made in [

] mode

again.

Checking Connection Information

Check the access point SSID used by the Eye-Fi card or the connection

status, as needed.

z

z

Press the <

n> button, choose

[Eye-Fi Settings] on the [

3] tab, and then

press the <

m> button.

z

z

Choose [Connection info], and then press

the <

m> button.

X

X

The connection information screen is

displayed.

COP

Y

Advertising