Canon PowerShot SX280 HS - Manual (Page 120)

1
2
3
4
5
6
7
8
9
10
11
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Using GPS
Function
Auto Mode/
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
120
Still Images
Correcting Red-Eye
Automatically corrects images affected by red-eye. You can save the
corrected image as a separate file.
1 Choose [Red-Eye Correction].
z z Press the < n> button, and then
choose [Red-Eye Correction] on the [ 1]
tab ( = 35 ).
2 Choose an image.
z z Press the < q><r> buttons or turn the
< 5> dial to choose an image.
3 Correct the image.
z z Press the < m> button.
X X Red-eye detected by the camera is now
corrected, and frames are displayed
around corrected image areas.
z z Enlarge or reduce images as needed.
Follow the steps in “Magnifying Images”
( = 108 ).
4 Save as a new image and review.
z z Press the < o><p><q><r> buttons or
turn the < 5> dial to choose [New File],
and then press the < m> button.
X X The image is now saved as a new file.
z z Follow step 5 in “Resizing Images”
( = 118 ).
• Some images may not be corrected accurately.
• To overwrite the original image with the corrected image, choose
[Overwrite] in step 4. In this case, the original image will be erased.
• Protected images cannot be overwritten.
Still Images
Correcting Image Brightness (i-Contrast)
Excessively dark image areas (such as faces or backgrounds) can be
detected and automatically adjusted to the optimal brightness. Insufficient
overall image contrast is also automatically corrected, to make subjects
stand out better. Choose from four correction levels, and then save the
image as a separate file.
1 Choose [i-Contrast].
z z Press the < n> button, and then
choose [i-Contrast] on the [ 1] tab
( = 35 ).
2
Choose an image.
z z Press the < q><r> buttons or turn the
< 5> dial to choose an image, and then
press the < m> button.
3 Choose an option.
z z Press the < q><r> buttons or turn the
< 5> dial to choose an option, and then
press the < m> button.
4 Save as a new image and
review.
z z Follow steps 4 – 5 in “Resizing Images”
( = 118 ).
• For some images, correction may be inaccurate or may cause
images to appear grainy.
• Images may look grainy after repeated editing using this function.
• If [Auto] does not produce the expected results, try correcting images using
[Low], [Medium], or [High].
COP
Y