Canon PowerShot SX280 HS - Manual (Page 170)

1
2
3
4
5
6
7
8
9
10
11
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Using GPS
Function
Auto Mode/
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
170
Still Images
Adding All Images to a Photobook
z z Following the procedure in “Choosing
a Selection Method” ( = 169 ), choose
[Select All Images] and press the < m>
button.
z z Press the < q><r> buttons or turn the
< 5> dial to choose [OK], and then press
the < m> button.
Still Images
Removing All Images from a Photobook
z z Following the procedure in “Choosing
a Selection Method” ( = 169 ), choose
[Clear All Selections] and press the < m>
button.
z z Press the < q><r> buttons or turn the
< 5> dial to choose [OK], and then press
the < m> button.
Still Images Movies
Using an Eye-Fi Card
Before using an Eye-Fi card, always confirm that local use is permitted
( = 2 ).
Inserting a prepared Eye-Fi card enables automatic wireless transfer of
images to a computer or uploading to a photo-sharing website.
Images are transferred by the Eye-Fi card. Refer to the card’s user manual
or contact the manufacturer for instructions on preparing and using cards or
resolving transfer problems.
• When using an Eye-Fi card, keep the following points in mind.
- Cards may continue to transmit radio waves even when [Eye-Fi
trans.] is set to [Disable] ( = 171 ). Remove the Eye-Fi card before
entering hospitals, aircraft, or other areas where transmission is
prohibited.
- When troubleshooting image transfer issues, check the card and
computer settings. For details, refer to the card’s user manual.
- Poor Eye-Fi connections may cause image transfer to take a long
time, and transfer may be interrupted in some cases.
- Eye-Fi cards may become hot, due to their transfer functions.
- Battery power will be consumed faster than in normal use.
- Camera operation may become sluggish. To resolve this, try
setting [Eye-Fi trans.] to [Disable].
SX270 HS
COP
Y