Canon PowerShot SX280 HS - Manual (Page 17)

1
2
3
4
5
6
7
8
9
10
11
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Using GPS
Function
Auto Mode/
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
17
Display Language
Change the display language as needed.
1 Enter Playback mode.
z z Press the < 1> button.
2 Access the setting screen.
z z Press and hold the < m> button, and
then immediately press the < n>
button.
3
Set the display language.
z z Press the < o><p><q><r> buttons or
turn the < 5> dial to choose a language,
and then press the < m> button.
X X Once the display language has been set,
the setting screen is no longer displayed.
• The current time is displayed if you wait too long in step 2 after pressing the
< m> button before you press the <n> button. In this case, press the
<m> button to dismiss the time display and repeat step 2.
• You can also change the display language by pressing the < n> button
and choosing [Language ] on the [ 3] tab.
2 Choose [Date/Time].
z z Move the zoom lever to choose the [ 3]
tab.
z z Press the < o><p> buttons or turn the
< 5> dial to choose [Date/Time], and
then press the < m> button.
3 Change the date and time.
z z Follow step 2 on = 16 to adjust the
settings.
z z Press the < n> button to close the
menu.
• Date/time settings can be retained for about 3 weeks by the camera’s built-in
date/time battery (backup battery) after the battery pack is removed.
• The date/time battery will be charged in about 4 hours once you insert a
charged battery or connect the camera to an AC adapter kit (sold separately,
= 157 ), even if the camera is left off.
• Once the date/time battery is depleted, the [Date/Time] screen will be
displayed when you turn the camera on. Follow the steps on = 16 to set the
date and time.
SX280 HS
• Automatic date and time updating is possible using GPS ( = 44 ).
COP
Y