Canon PowerShot SX280 HS - Manual (Page 152)

1
2
3
4
5
6
7
8
9
10
11
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Using GPS
Function
Auto Mode/
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
152
Screen Brightness
Adjust screen brightness as follows.
z z Choose [LCD Brightness], and then
press the < q><r> buttons to adjust the
brightness.
• For maximum brightness, press and hold the < l> button for at least
two seconds when the shooting screen is displayed or when in single-image
display. (This will override the [LCD Brightness] setting on the [ 3] tab.) To
restore the original brightness, press and hold the < l> button again for at
least two seconds or restart the camera.
Hiding the Start-up Screen
If you prefer, you can deactivate display of the start-up screen normally
shown when you turn the camera on.
z z Choose [Start-up Image], and then
choose [Off].
Formatting Memory Cards
Before using a new memory card or a card formatted in another device, you
should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy
images on the memory card to a computer, or take other steps to back them
up.
SX270 HS
An Eye-Fi card ( = 170 ) contains software on the card itself. Before
formatting an Eye-Fi card, install the software on a computer.
1 Access the [Format] screen.
z z Choose [Format], and then press the
< m> button.
2 Choose [OK].
z z Press the < o><p> buttons to choose
[Cancel], choose [OK] (either press the
< q><r> buttons or turn the <5> dial),
and then press the < m> button.
3 Format the memory card.
z z To begin the formatting process, press
the < o><p> buttons or turn the <5>
dial to choose [OK], and then press the
< m> button.
z z When formatting is finished, [Memory
card formatting complete] is displayed.
Press the < m> button.
COP
Y