Canon PowerShot SX280 HS - Manual (Page 42)

42
1
2
3
4
5
6
7
8
9
10
11
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Using GPS
Function
Auto Mode/
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
42
1
2
3
4
5
6
7
8
9
10
11
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Using GPS
Function
Auto Mode/
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
• Removing the battery after step 3 will deactivate the logger. To
reactivate the logger after battery replacement, turn the camera on
and then off again.
• Saving GPS log files is not possible when the memory card write-
protect tab is in the locked position. Make sure the tab is set to the
unlocked side.
• Location information, date and time will be saved to the memory
card when the camera is turned off or when displaying log files
( = 43 ). For this reason, if the camera is off and you want to
remove the memory card when the logger is being used, turn the
camera on, then turn it off again before removing the memory card.
• When using the logger function, exercise caution when turning the
camera over to another person, as the date and time, and logged
location information will remain on the camera until it is saved to a
memory card (even if the battery is depleted).
• Be careful when formatting memory cards ( = 152 ), because the
GPS log file will also be erased.
• You can also configure logger settings in n ( = 150 ).
3 Save the GPS log files to the
memory card.
z z When you turn off the camera, a
message about the logger is displayed.
The location information, date and
time will be saved to the memory card.
This information will not remain on the
camera.
z z The location information, date and time
will be saved to the memory card when
you do any of the following things.
X - Display the log files
X - Display the date/time setting screen
X - Display the time zone setting screen
z z If the camera is off and you want to
remove the memory card when the logger
is being used, turn the camera on, then
turn it off again before removing the
memory card.
COP
Y