Canon PowerShot SX280 HS - Manual (Page 150)

1
2
3
4
5
6
7
8
9
10
11
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Using GPS
Function
Auto Mode/
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
150
Date and Time
Adjust the date and time as follows.
z z Choose [Date/Time], and then press the
< m> button.
z z Press the < q><r> buttons to choose an
item, and then adjust the setting, either
by pressing the < o><p> buttons or
turning the < 5> dial.
World Clock
To ensure that your shots will have the correct local date and time when you
travel abroad, simply register the destination in advance and switch to that
time zone. This convenient feature eliminates the need to change the Date/
Time setting manually.
Before using the world clock, be sure to set the date and time and your
home time zone, as described in “Setting the Date and Time” ( = 16 ).
1 Specify your destination.
z z Choose [Time Zone], and then press the
< m> button.
z z Press the < o><p> buttons or turn the
< 5> dial to choose [ World], and then
press the < m> button.
z z Press the < q><r> buttons or turn the
< 5> dial to choose the destination.
z z To set daylight saving time (1 hour
ahead), press the < o><p> buttons to
choose [ ].
z z Press the < m> button.
2 Switch to the destination time
zone.
z z Press the < o><p> buttons or turn the
< 5> dial to choose [ World], and then
press the < n> button.
X X [ ] is now shown on the shooting screen
( = 179 ).
• Adjusting the date or time while in [ ] mode ( = 16 ) will automatically
update your [ Home] time and date.
SX280 HS
Activating GPS Features or Logging
GPS features and logging can be activated as follows. For instructions after
activating these features, see “Using GPS Function” ( = 40 ).
z z Choose [GPS Settings], and then press
the < m> button.
z z To activate GPS features, choose [GPS],
and then choose [On].
z z To activate logging, first activate GPS as
described above, choose [GPS Logger],
and then choose [On].
z z When you press the < n> button,
a message about GPS and logging is
displayed. Press the < m> button after
reading the message.
COP
Y