Avaya IP Office - Manual (Page 104)

Voicemail Pro Installation Page 104
EN-S Issue 01b (20 June 2011) IP Office
6.5 SNMP Alarm
The IP Office system can be configured to send alarms. These alarms can be sent from the IP Office using SNMP, SMTP
email or Syslog alarm formats. This tab is used to sets the levels at which the voicemail server will indicate to the IP Office
to send an alarm.
To set up disk space and recording time alarms:
1. Display the main Voicemail Pro window.
2. From the Administration menu, select Preferences > General.
3. Click the SNMP Alarm tab.
4. Choose the Alarm Threshold Unit either Disk Space Left (MB) or Recording Time left (minutes).
5. In the Alarm Threshold Level box, type the number of units (minutes or MB) left at which SNMP alarms are to be
triggered. The minimum is 11. This value also sets two further SNMP alarm levels which are:
· Space OK Alarm
This alarm is triggered when the amount of available space returns to above a level set at Alarm Threshold
Level plus 30.
· Critical Alarm
This alarm is set at 30 or, when the Alarm Threshold Level is less than 40, at Alarm Threshold Level minus 10.
Currently the critical alarm value will decrease in accordance with the above rule. Note however that it does
not increment upwards when the Alarm Threshold is increased again. To reset the critical alarm back to 30,
click Default Settings.
6. To return to the default alarm settings, click Default Settings. The Alarm Threshold Level is reset to 60. The Space
OK level is reset to 90. The Critical Alarm level is reset to 30.
7. Click OK.
8. Click Save and Make Live and select Yes.