Mlg-82 ii (gas) mls-82 ii (steam), Electric service specifications (per dryer) – American Dryer Corp. Gas- DSI/Steam ML-82 II User Manual
Page 24
20
2. Electrical Service Specifications
* AWG Stranded Wire Type...size wire as per National Electrical Code or local codes.
** IMPORTANT: In cases where fuses are used of the dual element type, time delay, current limit, class RK1
or RK5 ONLY.
IMPORTANT: The dryer must be connected to the electric supply shown on the data label that is
affixed to the left side panel area behind the top access (control) door. In the case of
208 VAC or 240 VAC, the supply voltage must match the electric service
specifications of the data label exactly.
IMPORTANT: The wire size must be properly sized to handle the related current.
WARNING: 208 VAC and 240 VAC ARE NOT THE SAME. Any damage done to dryer
components due to improper voltage connections will automatically VOID THE
WARRANTY.
NOTE: ADC reserves the right to make changes in specifications at any time without notice or
obligation.
MLG-82 II (Gas)
MLS-82 II (Steam)
ELECTRIC SERVICE SPECIFICATIONS (PER DRYER)
IMPORTANT: 208 VAC and 240 VAC ARE NOT THE SAME . When ordering, specify exact voltage.
NOTES:
A.
Circuit breakers are thermal magnetic (industrial) motor valve type ONLY . For others, calculate/verify
correct breaker size according to appliance amp draw rating and type of breaker used.
B.
Circuit breakers for 3-Phase (3ø) dryers must be 3-pole type.
SERVICE
VOLTAGE
PHASE
WIRE
SERVICE
APPROX.
AMP DRAW
MINIMUM
WIRE SIZE
CIRCUIT
BREAKER
AMPERAGE**
60 Hz
50 Hz
60 Hz
50 Hz
208
3ш
3
/4
12.4
--
*
25
--
240
3ш
3
12.4
16.4
*
25
30
380
-400
3ш
3
/4
--
7
.7
*
- -
15
416
3ш
3
/4
--
8.1
*
- -
15
460/480
3ш
3
/4
6.7
--
*
15
--