LG 42LD6DDH - Manual (Page 102)

7 206-4190
Commercial Mode Overview
Typical Installer Menu
HOSPITAL PTC INSTALLER MENU
000 INSTALLER SEQ 000
UPN 000-000-000-000 ASIC 20E7
PTC V0.00.007 CPU V3.30.00
This document describes how to set up LG3DDH and LD6DDH TVs for Commercial Mode operation.
There are two methods for configuring stand-alone TVs: either using the Express Script Installer Menu
Wizard or the Custom Master TV Setup procedure as described in this document. These TV models also
allow external control via the TV’s MPI port, and if a Free-To-Guest device is installed in the TV MPI card
slot, the TV can be configured for FTG Mode.
Express Script Installer Menu Wizard
The Express Script Installer Menu Wizard guides you through the process of setting up the TVs, limiting
the customization of TV features and Installer Menu items to those that are essential to most hospital TV
viewing applications. The Express Script Installer Menu Wizard is described in detail on pages 9 to 10.
Note: While the Express Script Installer Menu Wizard enables you to set up TVs in lieu of cloning, you
can also use an Express Script TV Setup for cloning purposes, if desired. However, note that TV setup
menu customization via the Express Script Installer Menu Wizard is limited to Channel Menu options.
Custom Master TV Setup
Unlike the guided process above, the Custom Master TV Setup procedure enables you to create a
customized Master TV Setup for cloning purposes. Configure Installer Menu items as required for TV
operation and set up TV features (Channel, Picture, Audio, etc.). The Custom Master TV Setup procedure
is described in detail on pages 11 to 14.
TV Setup Menus
PICTURE AUDIO
OPTION TIME
CHANNEL
LOCK
Installer Menu
To create a customized Master TV Setup, you will need to know how
to enter the commercial controller (Protocol Translator Card [PTC])
Installer Menu and make changes to the default values as required.
If necessary, familiarize yourself with the Installer Menu and how to
make and save changes. Refer to pages 15 to 21 for information on
accessing the Installer Menu and for detailed descriptions of the
Installer Menu items.
TV Setup Menus
On-screen setup menus control the features of the TV. Use the
Installer Remote to access the TV setup menus, and set the TV
features to the desired configuration for the end user. Refer to the
Owner’s Manual for detailed information on the TV setup menus.
Cloning
Cloning refers to the process of capturing a Master TV Setup and
transferring it to a Target TV. The Master TV’s clonable setup menu
features should be configured as part of the Master TV Setup. If
there are features in the Master TV’s setup—channel icons or labels,
digital font options, etc.—that are not set or that are set incorrectly,
those features also will not be set or will be set incorrectly in the
Target TVs. Pages 27 to 33 provide detailed information on cloning
requirements and procedures.
Note: If desired, an Express Script TV Setup also may be used for
cloning purposes.