LG 42LD6DDH - Manual (Page 132)

37 206-4190
Reference: TV Camport Auto Sense Operation
(26/32LG3DDH and 42LD6DDH TVs Only)
The Camport Auto Sense function is enabled when:
1. Installer Menu item 34 CAMPORT EN is set to 1 AND
2. Installer Menu item 40 AUTO CAMPORT is enabled (1).
Selectable: Can be accessed with INPUT key, direct
access, etc.
Auto Sense: TV switches to this input when connector is
inserted. The Camport (Side [AV IN 2] Video) has the highest
priority and will override any commands including tuning to
the Start Channel.
CAMPORT (Side Video) Functionality Control
Item 034
CAMPORT EN
Item 040
AUTO CAMPORT
Side (AV IN 2)
Video Operation
0 0 Disabled
0 1 Disabled
1 0 Selectable
1 1 Auto Sense
Camport Operation (Stand-alone)
When Camport Auto Sense is enabled as above, the TV
will switch from its current source to the Side (AV IN 2)
Video input whenever a plug is inserted into the AV IN 2
Video input.
When the video plug is removed, the TV will switch back to
the previous source that was being displayed before the
plug was inserted. However, if any direct access to an RF
channel or Aux channel is requested while the Camport is
active, then, when the video plug is removed, the TV will
switch to the last requested channel. Source changes
using any Source keys (INPUT) are ignored. Channel Up/
Down and Flashback commands are not direct access
tuning commands, and they are also ignored.
Previous State
Before Inserting
CAMPORT
Operation While
CAMPORT is
Active
State Upon
Removal of
CAMPORT
Aux or RF
Channel
None
Previous Aux
or RF Channel
Aux or RF
Channel
Direct Access
Last Requested
Aux or RF Channel
Aux or RF
Channel
Ch Up/Down,
Flashback, and
Input Keys
Previous Aux
or RF Channel
Camport Operation (PPV)
The operation will be similar to that of the Stand-alone
Mode. However, when the Channel Map is maintained
external to the PTC (i.e., PPV), Channel Up/Down or
Flashback keys are sent as Direct Access tuning com-
mands to the PTC/TV.
Previous State
Before Inserting
CAMPORT
Operation While
CAMPORT is
Active
State Upon
Removal of
CAMPORT
Aux or RF
Channel
None
Previous Aux
or RF Channel
Aux or RF
Channel
Direct Access
Last Requested
Aux or RF Channel
Aux or RF
Channel
Ch Up/Down,
Flashback, and
Input Keys
Last Requested Aux
or RF Channel