Cloning overview – LG 42LD6DDH User Manual

Page 122

Advertising
background image

27

206-4190

There are three options for cloning a Master TV Setup (including a TV that has been set up using the

Express Script Installer Menu Wizard):

Using a USB memory device

Using a TLL-1100A clone programmer

Using a LT2002 clone programmer

Each option is described in further detail on the pages that follow. As you perform cloning procedures, be

sure to complete each task as indicated. If a procedure or step is omitted or not performed completely,

cloning may not work. At each step, pay attention to ensure the TV screen shows the proper message

when cloning. If the message indicated does not appear, there is a problem with that step, and cloning

may not be successful.

Caution: Copying a blank or incorrect memory into a TV from a clone programmer will

cause the TV to operate erratically or become inoperable.
Caution: Do not connect a clone programmer to a PPV card installed in the Master or

Target TVs, as this will damage the clone programmer and the PPV card.

Cloning Overview

IMPORTANT CLONING INFORMATION

Before you begin cloning:

Complete the Custom Master TV Setup procedure or run the Express Script Installer Menu Wizard (see

pages 11 to 14 or pages 9 to 10, respectively).

All equipment should be connected to power and turned ON.

Learning and Teaching is only possible between identical model TVs.

If using a USB memory device, ensure the USB device has been formatted with FAT format.

For both Master and Target TVs—If using a clone programmer, ensure the TV is tuned to either an Aux

input or an analog (not a digital) channel.

LT2002 only—Make sure the batteries in the clone programmer are fresh. If batteries are removed, the

clone programmer clock time (if set) will be lost (see page 33 for information on the clone programmer

clock).

Caution: Do not unplug the TV power cord or remove/disconnect the USB memory device/

clone programmer while Learning or Teaching, as doing so may cause the TV to malfunc-

tion or harm the USB device/clone programmer, respectively.

Advertising