A&D FS-D - Manual (Page 11)

9
No. NAMES FUNCTIONS / OPERATION
COMPARISON INDICATORS
Indicates the results of the weight comparison
LO (RED), OK (GREEN) and HI (YELLOW).
STABLE ANNUNCIATOR Turns ON when the weight reading is STABLE.
ZERO ANNUNCIATOR
Turns ON when the weight is in the center of
ZERO range.
NET ANNUNCIATOR
Turns ON when the display shows the NET
weight.
PT ANNUNCIATOR
Turns ON when the display shows the preset tare
weight.
PRINT ANNUNCIATOR
Turns ON for a moment when the weight data is
sent by the PRINT/ENT or auto-printing.
PRECAUTION AGAINST
LOW BATTERY Turns ON when the optional battery is getting
close to low battery.
ON/OFF Key
Turns the power on or off. When turned on,
the power-on zero will work.
ZERO / ± Key
Zeroes the indicator when the weight is stable.
Or the key switches the sign “+” & “-”.
TARE Key
Zeroes the display and switches to net weight
mode when the weight is plus and stable.
PT Key
The key is used to enter a tare weight via the
10-key pad.
SAMPLE / 9 Key
To register the sample weight as a target.
Or the numeric key 9 in the data entry.
KEY / 8 Key
To enter a target weight via the 10-key pad.
Or the numeric 8 in the data entry.
RECALL / 7 Key
To recall target weight and/or HI/LO limits.
Or the numeric 7 in the data entry.
HI / 6 Key
To enter comparator HI limit via the 10-key pad.
Or the numeric 6 in the data entry.
LO / 5 Key
To enter comparator LO limit via the 10-key pad.
Or the numeric 5 in the data entry.
STORE / 4 Key
To store target weight and/or HI/LO limits.
Or the numeric 4 in the data entry.
DISP. / 3 Key
Switches the analog sweep display modes.
Or the numeric 3 in the data entry.
UNITS / 1 Key
To select the desired weighing unit.
Or the numeric 1 in the data entry.
PRINT / ENT Key
To send a data string through the optional
interface. Or to ENTER the numeric data.
C Key
The key to clear an incorrect data entry from the
numeric keypad.
0 and 2 Keys The numeric keys 0 and 2.
5
6
7
8
9
10
11
12