Introduction – A&D FS-D User Manual
Page 5
3
2. INTRODUCTION
This manual describes how this product works and how to get the most out of it in
terms of performance.
The FS-D weighing indicator is used to build high performance check weighing
scales. It has similar specifications and functions as an indicator of the FS-i series.
Please refer to the instruction manual for the FS-i supplied with the FS-D.
The FS-D indicator has the following features.
The indicator can be used to build platform scales from 6 kg (15 lb) capacity to 1500
kg (3500 lb) capacity.
The indicator can drive up to 4 x 350 Ω load cells.
Three weight display resolutions are available, 1/3,000, 1/6,000 (~1/7,500) and
1/12,000 (~1/15,000) to cover various applications.
Weighing units are kg (kilogram), g (gram), lb (pound), oz (ounce), and lb-oz
(pound and ounce). However, the FS-D set to a capacity higher than 30 kg (70 lb)
does not have all of them. Refer to “11-1. Capacity and minimum display” in detail.
Waterproof to IP-65 specifications.
Constructed from stainless steel for harsh working environments.
Large liquid crystal display with back lighting and analog sweep display of 60
segments with back lighting.
AC power source (100V ~ 240V), and an optional SLA (sealed lead acid) battery is
available for operation where AC power is not available.
Built in comparator lights with large and bright red, green and yellow LEDs for better
visibility.
Two modes of comparator operation, Target weight setting and Upper / Lower limits
setting.
Take-away check weighing with auto-tare function.
Optional serial data and comparator relay interface.