Cv5 touch panel accessories, Overview, Nxa-avb/ethernet breakout box (fg2254-10) – AMX Modero NXD-CV5 User Manual

Page 19: Product specifications

Advertising
background image

CV5 Touch Panel Accessories

7

NXD-CV5 5" Modero Wall/Flush Mount Touch Panel

CV5 Touch Panel Accessories

Overview

The following section outlines and describes both the included accessories and other AMX equipment
available for these touch panels.

NXA-AVB/ETHERNET Breakout Box (FG2254-10)

The NXA-AVB/ETHERNET Breakout Box (FIG. 3) is sold as a separate accessory to the CV5 panel and does
not come as part of a Kit configuration for this panel. This box facilitates the installation and distribution of
video, data, and audio to Modero touch panels located up to 200 feet (60.96 m) from the AVB box. This unit
accepts either Composite or S-Video from standard video devices.

This breakout box can be mounted on either a horizontal flat surface or within an equipment rack
(by using an optional AC-RK Rack Kit).

Product Specifications

FIG. 3

NXA-AVB/ETHERNET Breakout Box (front and rear views)

NXA-AVB/ETHERNET Specifications

Dimensions (HWD):

• 1.50" x 5.55" x 4.88" (3.81 cm x 14.10 cm x 12.40 cm)
• Width when attached to mounting ears: 6.65" (16.89 cm)

Power Consumption:

• 50mA (with audio/video input)
• 23mA (with no audio/video)
• Routed through NXA-AVB/Ethernet using a 12 VDC-compliant power supply

Certifications:

• FCC Part 15 Class B, CE, and EN60950

Features:

• Accepts either Composite or S-Video (video-capable panels only)
• Provides audio distribution to the non-video touch panels over a CAT5 cable

(up to 200 ft.)

• Provides video/audio distribution to the video-capable touch panels over

CAT5 cable up to 200 ft.(60.9 m)

Availability:

• This unit is included with CV5, CV7, CV10, and 1200V-Series Kit

configurations

Front Components:

• 2-pin 3.5 mm Phoenix connector for power to the touch panel
• Green LED provides an indication of power status
• RJ-45 connector provides Ethernet signals to the touch panel
• RJ-45 connector provides differential audio and video signals to the touch

panel (panel type dependant)

Power In

(front)

Ethernet (to panel)

Audio/Video

Power (to panel)

S-Video Chroma

Composite/

Mic Out

Audio

In

Ethernet In

S-Video

Luma

(rear)

(to panel)

Advertising