AMX Modero NXD-CV5 - Manual (Page 73)

Firmware Pages and Descriptions
61 NXD-CV5 5" Modero Wall/Flush Mount Touch Panel
Panel Information Page
The Panel Information page (FIG. 57) centers around Modero panel properties such as: resolution used, on-
board memory, firmware, address/channel information, and string information.
The elements of the Panel Information page are described in the table below:
FIG. 57 Panel Information page (takes its’ information from the touch panel)
Panel Information Page Elements
Back: Returns you to the previously active touch panel page.
Connection Status icon: This visual display of the connection status allows the user to have a current
visual update of the panel’s connection status regardless of what page is
currently active.
• A Lock only appears on the icon if the panel has established a connection
with a currently secured target Master (requiring a username and password).
Panel Type: Displays the model of the Modero panel being used.
Firmware Version: Displays the G4 firmware version being used by the panel.
• Verify you have the latest version from www.amx.com.
Setup Port: Displays the setup port information/value being used by the panel.
High Port: Displays the high port (port count) value for the panel.
High Address: Displays the high address (address count) value for the panel.
High Channel: Displays the high channel (channel count) value for the panel.
High Level: Displays the high level (level count) value being used by the panel.
Serial Number: Displays the specific serial number value assigned to the panel.
Setup Pages Version: Displays the type and version of the Setup pages being used by the panel.
Screen Width: Displays the pixel width being used to display the incoming video signal on the
Modero panel.
• Maximum available screen width on a CV5 Modero panel is 800 pixels.
Screen Height: Displays the pixel height being used to display the incoming video signal on the
Modero panel.
• Maximum available screen height on a CV5 Modero panel is 480 pixels.
Screen Refresh Rate: Displays the video refresh rate applied to the incoming video signal from the
panel. Default rate is 60.
Screen Rotation: Displays the degree of rotation applied to the on-screen image.
Power Up Pages: Displays the first touch panel page assigned for display after the device is
powered-up.
• This information is taken from the TPD4 project file.
• Most projects begin with a Main page.
Start Up String: Displays the start-up string.
Wake Up String: Displays the wake up string used after an activation from a timeout.
This information is retrieved
from the Modero panel