HP Storage Essentials NAS Manager Software - Manual (Page 114)

Discovering NAS Devices, Tape Libraries, Switches and Storage Systems 82
5. In the IP Address/DNS Name field, type the IP address or DNS name of the system running the
IBM CIMOM you want to discover.
6. Enter the User Name of the system running the IBM CIMOM.
7. Enter the Password of the system running the IBM CIMOM.
8. Retype the password in the Verify Password field.
9. In the Comment field (optional), type a comment for additional information. The information
typed into this field is displayed under the Comment column in the Addresses to Discover list
(Tools > Storage Essentials > Home > Discovery > Setup).
10. Do not select the Do Not Authenticate option.
11. Click OK.
12. To start discovering elements on the network, click the Start Discovery button on the IP
Addresses tab.
Discovering Sun StorEdge 3510 Storage Systems
Before you can discover a Sun StorEdge 3510 storage system, you must set up a Sun StorEdge
3510 SMI-S provider and a Sun StorEdge™ Configuration Service. The provider cannot be installed
on the same computer as the management server due to a port conflict.
The Sun StorEdge™ Configuration Service can be installed in one of the following locations:
• on the same computer as the Sun StorEdge 3510 SMI-S provider
• on the management server
• on a separate computer
To install the Sun StorEdge™ Configuration Service you must install the following packages:
• Sun StorEdge™ Configuration Service Console (SUNWscsu)
• Sun StorEdge™ Configuration Service Agent (SUNWscsd)
• Sun StorEdge™ Diagnostic Reporter Agent (SUNWscsa)
You must also install the following packages. Contact Sun technical support for information on how
to obtain and configure these packages.
• WBEM Solutions J WBEM Server 1.0
• Sun StorEdge™ CIM/WBEM Provider SDK (SUNWagsdk package) - A readme file is installed
as part of SUNWagsdk package. Follow the instructions in that readme file.
• Sun StorEdge™ 3510 SMI-S Provider (SUNW3x10a package) - A readme file is installed as
part of SUNW3x10a package. Follow the instructions in that readme file.
To discover Sun StorEdge 3510 storage systems, you must discover the Sun StorEdge 3510 SMI-S
provider. To discover a Sun StorEdge 3510 storage system, you must enter the following information
for the instance of the Sun StorEdge 3510 SMI-S provider.
• user name and password used for the system running Sun StorEdge 3510 SMI-S provider
• IP address of the system running Sun StorEdge 3510 SMI-S provider