Capacity information for hosts, Capacity information for netapp nas devices – HP Storage Essentials NAS Manager Software User Manual
Page 612
Finding an Element’s Storage Capacity
580
•
Percentage Used -
The percentage used compared to the total capacity of the storage groups
or database files.
The following additional information is displayed for each storage groups (Microsoft Exchange) or
database file (Oracle):
•
Total Capacity
•
Total Used
•
Available
•
Percentage Used
- The percentage used compared to the total capacity of the storage group or
database file.
Capacity Information for Hosts
Capacity Manager displays the following information under the Capacity Summary and
Capacity
columns:
•
Total Capacity
•
Total Used
•
Available
•
Unmounted Volume
- The amount in megabytes of unmounted storage.
NOTE:
This field automatically displays 0 MB if you discovered the host but not the storage
system connected to it. This may occur if you did not enter the IP address of the storage
system when performing discovery and/or your license does not allow you to discover a
particular storage system. See the Supported Elements section in the “List of Features” to
determine which storage systems you can discover. The “List of Features” is accessible from
the Documentation Center (Help > Documentation Center in Storage Essentials).
•
Percentage Used -
The percentage used compared to the total capacity of the storage
volumes.
The following additional information is displayed for each volume:
•
Total Capacity
•
Total Used
•
Available
•
Percentage Used
- The percentage used compared to the total capacity of the storage volume.
Capacity Information for NetApp NAS Devices
Capacity Manager displays the following under the Capacity Summary and Capacity columns
on the Volume Data tab:
•
Total Aggregate Available
•
Total Aggregate Used
•
Total Volume Maximum
•
Total Volume Used