Adding microsoft exchange domain controller access, Deleting a microsoft exchange domain controller – HP Storage Essentials NAS Manager Software User Manual
Page 169
Storage Essentials 5.1 User Guide 137
•
Discover the application.
Adding Microsoft Exchange Domain Controller Access
To obtain information about your Microsoft Exchange servers, you must provide the user name and
password for at least a primary domain controller, in addition to a DNS name, as described in the
following steps.
IMPORTANT:
The hosts should recognize the management server by name, as a reverse look-up is
required by operating system security as well as Microsoft Exchange.
To provide information about the Microsoft Exchange servers:
1.
Do one of the following:
• Discovery HP SE - Select Tools > Storage Essentials > Home > Discovery > Setup.
Then, click the Applications tab.
• Discovery HP SIM - Select Options > Protocol Settings > Storage Essentials > Global
Application
Discovery Settings.
The information you provide for the primary domain controller and backup domain controller
apply to all Microsoft Exchange servers you discover.
2.
In the Microsoft Exchange Configuration section, click the Edit button.
3.
Under the Primary Domain Controller section, perform the following steps:
a. In the Host Name field, type the fully qualified DNS name for the domain controller.
b. In the User Name field, type the user name for accessing the Microsoft Exchange server.
c. In the Domain Password field, type the corresponding password for accessing the
Microsoft Exchange server.
d. In the Verify Password field, re-type the password for verification.
4.
Under the Backup Domain Controller section, perform the following steps:
a. In the Host Name field, type the fully qualified DNS name for the domain controller.
b. In the User Name field, type the user name for accessing the Microsoft Exchange server.
c. In the Domain Password field, type the corresponding password for accessing the domain
controller.
d. In the Verify Password field, re-type the password for verification.
5.
Click the OK button.
IMPORTANT:
You must discover the host running Microsoft Exchange. See ”
Deleting a Microsoft Exchange Domain Controller
To delete a Microsoft Exchange domain controller:
1.
Do one of the following: