HP Storage Essentials NAS Manager Software - Manual (Page 157)

Storage Essentials 5.1 User Guide 125
Keep in mind the following:
• Before you remove the APPIQ_USER account for an Oracle instance, make sure no processes are
running APPIQ_USER for that Oracle instance. The management server uses APPIQ_USER to
obtain information about the Oracle database. For example, a process would be using
APPIQ_USER if someone was using Performance Manager to view monitoring statistics about
that Oracle instance. (Discovery from HP SE only)One of the ways to make sure APPIQ_USER is
not being used is to temporarily remove the host running Oracle (Discovery > Topology).After
you removed the APPIQ_USER account for Oracle, discover and perform Discovery Data
Collection/Get Details for the host if you want to continue monitoring it.
• If you receive a message about not being able to drop a user that is currently connected while
you are removing the APPIQ_USER account for Oracle, re-run the script for removing
APPIQ_USER.
To remove the APPIQ_USER account for that Oracle instance:
1. If you plan to remove the management software for Oracle from a Solaris host, do the following:
a. Log into an account that has administrative privileges.
b. Mount the CIM Extensions CD-ROM (if not auto-mounted).
c. Go to the /DBIQ/Oracle/unix directory by typing the following:
# cd /cdrom/cdrom0/DBIQ/Oracle/unix
where /cdrom/cdrom0 is the name of the CD-ROM drive
2. If you plan to remove the management software for Oracle from a computer running Windows,
go to the \DBIQ\Oracle\win directory on the CD-ROM.
3. Verify you have the password to the SYS user account.
You are prompted for the password for this user account when you run the script.
4. Run the UninstallOracleAct.bat for Windows or UninstallOracleAct.sh script for UNIX
platform on the computer with the Oracle database.
5. This script removes the management software for the specified Oracle instance.
NOTE: You can use a remote Oracle client to run this script.
6. When you are asked for the Oracle instance name, enter the name of the Oracle instance you
do not want the management server to monitor. The name must be visible to the client.
7. Provide the password for the SYS user account.
The APPIQ_USER account for the specified Oracle instance is removed. The management server
can no longer monitor that Oracle instance.
Step B - Provide the TNS Listener Port
If your Oracle instances use a different TNS Listener Port than 1521, change the port as described
in the following steps:
1. Do one of the following:
• Discovery from HP SE - Select Tools > Storage Essentials > Home > Discovery >
Setup . Then, click the Applications tab.