Discovering 3par storage systems, Discovery from hp sim discovery from hp se, Discovering 3par storage – HP Storage Essentials NAS Manager Software User Manual
Page 96: Systems
Discovering NAS Devices, Tape Libraries, Switches and Storage Systems
64
Discovering 3PAR Storage Systems
NOTE:
You do not need to provide the interop namespace because the management server
includes the interop namespace for 3PAR storage systems in its default list.
IMPORTANT:
To be able to discover a 3PAR storage system, the SMI-S server for the 3PAR storage
system must be running. By default, the 3PAR SMI-S server is not started on the array. To start the
SMI-S server, bring up the InForm CLI and run the following command:
startcim
This command starts the SMI-S server within a minute or so.
Discovery from HP SIM
To discover a 3PAR storage system, provide the following information in HP Systems Insight
Manager:
•
Provide the IP address or system name for the storage system. See ”
Adding a Single IP Address or DNS Name for Discovery
page 28 for more information.
•
User name of the storage system.
•
Password of the storage system.
Discovery from HP SE
To discover a 3PAR storage system:
1.
Click Tools > Storage Essentials > Home. See ”
Accessing the Discovery Pages for HP SIM
” on page 19 if needed. Discovery > Setup.
HP NAS Devices
Discover the device directly.
See ”
NetApp Devices
Discover the device directly.
See ”
Sun NAS Devices
Discover the server running the
SMI-S provider for the Sun NAS
Devices.
See ”
HP and IBM Tape
Libraries
Provide the IP address, namespace,
user name and password for the
tape library.
See ”
Table 11
Discovery Requirements for Storage Systems, Tape Libraries & NAS Devices (continued)
Element
Discovery Requirements
Additional Information